Intro -- Advanced Construction Technologies -- Preface and Conference Organization -- Table of Contents -- Chapter 1: Structural Engineering -- A Nonlinear Model for Beam-Column Joint Based on OpenSees -- A Study on the Effect of a Dyke Reinforced by Geotextile-Encased Sand Columns -- Analysis of a Transmission Tower Structure with Dynamic Elastic-Plastic Time History Method -- Analysis of Composite Beam with Different Web Openings -- Analysis of Reconstruction and Reinforcement Design for a Thermal Power Plant Boiler Frame -- Axial Strains in FRP-Confined Normal- and High-Strength Concrete: An Examination of Strain Measurement Methods -- Comparison of Stress-Strain Relationships of FRP and Actively Confined High-Strength Concrete: Experimental Observations -- Construction Control of a Continuous Beam Arch Composite Bridge -- Construction Technique of Cast In Situ RC Grillage Shear Wall Building Formed with Thermal Insulation Hollow Blocks -- Damage Identification Based on Power Spectral Density Sensitivity Analysis of Structural Responses -- Damage Location Identification of Truss Structure Based on Strain Modal Method -- Design Analysis of Steel Frame for Denitrification through Existing Structure -- Design and Numerical Simulation on Concrete Two-Way Slab Strengthened with Partially Bonded Steel Plate -- Discussion on the Rationality Simplified Calculation Method of Reinforced Concrete Two-Way Slab -- Displacement Control Technology on High-Rise Steel Structure about Main Power House of Thermal Power Plant -- Dynamic Analysis of Tapered Plates Based on Higher Order Beam Theory -- Effect of Loading Pattern on Performance of FRP-HSC-Steel Double Skin Tubular Columns -- Evaluation of Snow Load Using a Wind Tunnel on the Arched House.

Evaluation of the Fire Resistance of H-Section Made of High Strength Structural Steels with a Difference of Length -- Experiment Design of the Scale Model of the RC Frame Structure under Internal Blast Loading -- Experimental Study of Reinforcement Effect of Injured Frame Joints under Different Axial Compression Ratio -- Experimental Study of Strengthening of Reinforced Concrete Beams with Externally Bonded GFRP Sheets -- Experimental Study on Early-Age Crack of RC Using TSTM -- Experimental Study on Glued Bamboo Beam -- Experimental Study on the Flexural Behavior of Stone Slabs with near Surface Mounted Steel Bar -- Failure Analysis of Reinforced Concrete Beams Subjected to Explosion and Post-Explosion Fire -- Finite Element Software for Optimization of Triangular Light Roof Truss Structure of Gymnasium -- Geometric Nonlinear Shallow Shells for Variable Thickness Investigation -- Interfacial Slip Calculation of RC Beams Strengthened with FRP Plate under Mid-Span Concentrated Loads -- Isolation Performance Analysis of Concrete-Filled Steel Tubular Composite Structure Based on the Lead Rubber Bearing -- Lifting Point Optimization of Large Steel Truss on the Principle of Minimum Potential Energy -- Non Shrinkage Self-Compacting Steel Box Concrete Application in a Landscape Tower -- Nonlinear Buckling Analysis of Long-Span Suspended Latticed Intersected Cylindrical Shell -- Nonlinear Finite Element Method Ultimate Strength Analysis of Open Box Girders -- Nonlinear Numerical Study of Cold-Formed Lipped Channel Beam-Columns -- On Expected Performance of a Frame-Structure Made by All GFRP Pultruded Profiles -- Parametric Sensitivity Analysis of Long-Span Arch-Truss String Structure -- Performance Based Optimized Design of Steel Structure -- Prediction Method of the Load Resisting Mechanisms in the Corroded RC Beams.

Research on Compressible Flow around Cylinder and Truncated Cone with LES Method -- Snow Wind Tunnel Experiment for Snowdrift Prediction of Domed Stadium -- Stress and Stability Analysis of a Cooling Tower by ANSYS -- Study on Collapse Numerical Simulation Method of Frame Structures Based on Explicit Dynamics -- Study on Dynamic Characteristics of a New Space Latticed Shell String Structure -- Study on New Reinforcing Method of Composite Beam with Web Openings under Negative Moment -- Test Scheme and Result Analysis of New-Type Frame Structure with Column End of Steel-Concrete Composite Joint -- The Dynamic Characteristic and Response's Discussion of External Prestressing Curved Beam -- The Effect of Splicing Area Parameters on Mechanical Behavior of Beam-Column Connection with Cantilever Beam Splicing -- The Numerical Simulation Experiment of Exploded in the Flat Box Sealed Structure -- The Optimization Calculation and Analysis of Trough Solar Collector Bracket System -- Thermal Effect Test of Outer Compressive Ring of the Roof of Bao'an Stadium -- Transverse Free Vibration of Timoshenko Beams Resting on Viscoelastic Foundations -- RPC Pole Composite Cross Arm Design and Wind-Induced Dynamic Analysis -- Exterior-Template Design for Concrete Engineering in an Arched Structure -- The Strain Change Rules of Full-Scale High Strength Concrete Frame Columns with High Axial Compression Rations -- Upheaval Buckling Analysis of Buried Offshore Pipelines under High Temperature and High Pressure -- A Case Study on the Use of Aluminum Forms in Nuclear Power Plant Construction -- Chapter 2: Monitoring and Control of Structures -- A DE-Based Algorithm for Structural Damage Detection -- Construction Monitoring of Prestressed Concrete Continuous Beam Bridge -- Experimental Measurement of Two-Dimensional Circular Boundary Temperature Field by Acoustic Method.

Knowledge of the Construction Technique of the Multiple Leaf Masonry Façades of Palazzo Ducale in Venice with ND and MD Tests -- Modal Parameter Identification of Concrete Filled Steel Tube Arch Bridge Based on Stochastic Subspace Method -- Moving Force Identification Based on Firefly Algorithm -- Static Monitoring and Non-Destructive Test of a Historic Damaged Palace -- Structural Damage Detection by Fusion of GA and PSO -- Structural Diagnosis of a Historic Tower Hit by Earthquake -- Test of Thick Rubber Bearings on its Compressive Properties -- The Vibration Modal Displacement Component Method of Identifying the Crack Damage from Simple Supported Beam -- Development of On-Site Fast Detector Used for Waterproof Membrane Joint Peeling Strength -- Analysis of Displacement Influence Line Characteristics of Simply Supported Beam with Local Damage -- Detection and Monitoring Technologies of Bridge Cable Force and Disease -- Edge Detection Technology and its Application in the Model Test of Vehicle Bridge Coupled Vibration -- Critical Application Technology of PIV in Dynamic Centrifugal Test and Design Method of Instrumentation -- Detection of Unfavorable Karst Cavities in the Carbonaceous Bedrock Area at the Kaihua Segment of Hangzhou-Xinanjiang-Jingdezhen Expressway -- Ubiquitous Sensor Network for Construction Site Monitoring -- Research on the Environmental Effects of GB-SAR for Dam Monitoring -- Chapter 3: Structural Rehabilitation, Retrofitting and Strengthening -- A New Reinforcement Measure Suited for Space Truss with No-Fire Operation -- Experimental Investigation on Axial Compressive Behavior of Masonry Column Strengthened by SGFRP -- Experimental Investigation on Shear-Reinforced Masonry Sample with FRP Bars -- Experimental Study on the Bonding Behavior of GFRP-to-Brick Interface.

Model's Calibration for Masonry Reinforced with FRP Mesh-Bars -- Reinforcement Planning Decision of Old Bridge Based on TOPSIS-AHP Method -- Review of the Study on the FRP Strengthened Masonry Walls -- Simulation on Strengthening of a Cement Fresh Material Silo -- The Concrete Protective Effect of Silane Impregnated Materials with Different Molecular Chain Structure -- Safety Evaluation of Reinforced Concrete Girder Bridge after Strengthened with Pasting Technology -- Chapter 4: Reliability and Durability of Structures -- Application of Fuzzy Pattern Recognition in Spalling Risk Evaluation of Concrete Structures at High Temperature -- Application of the Failure Assessment Method for Cracked Pipeline -- Experimental Study on Influence of Bending Load on Chloride Ion Concentration of Concrete in Marine Environment -- National Road 209 Line Shibi Mountain Bridge Concrete Anti-Carbonation Performance Analysis -- Safety Assessment of Large-Scale Crude Oil Tank after Fire Process -- The Effect of Section Optimization on the Double Nonlinear Global Stability of Latticed Shell -- The Influence of Main Components of Building under Residual Deformation in Subsidence Area -- Chapter 5: Disaster Prevention and Mitigation -- Explosion Experimental Study Based on the Small Tailings Pond Model -- Fire Resistance of Reinforced Concrete Column Exposed to Fire with Cooling Phase -- Modeling of Mechanical Damage in Traditional Brickwork Walls after Fire Exposure -- Research on HSE Risk Assessment and Control in Oil-Gas Drilling Operations -- Study on Fire Risk Assessment on Irradiation Room under Stuck Radioactive Sources -- Study on Fire Risk Assessment on Round Irradiation Room of Stacking under Stuck Radioactive Sources -- Wind Tunnel Test of Symmetrical Twin-Tower Tall Building Model -- Work at Height in Safety Work Plan Management -- Chapter 6: Bridge Engineering.

A Revised the B3 Creep Prediction Model Based on Short-Time Tests.

Collection of selected, peer reviewed papers from the 2014 International Conference on Structures and Building Materials (ICSBM 2014), March 15-16, 2014, Guangzhou, China. The 431 papers are grouped as follows: Chapter 1: Structural Engineering, Chapter 2: Monitoring and Control of Structures, Chapter 3: Structural Rehabilitation, Retrofitting and Strengthening, Chapter 4: Reliability and Durability of Structures, Chapter 5: Disaster Prevention and Mitigation, Chapter 6: Bridge Engineering, Chapter 7: Geotechnical and Geological Engineering, Chapter 8: Tunnel, Subway and Underground Facilities, Chapter 9: Seismic Engineering, Chapter 10: Roads, Railway Engineering and Traffic Engineering, Chapter 11: Hydrology, Coastal and Hydraulic Engineering, Chapter 12: Computational Mechanics and Mathematical Modeling, Chapter 13: Construction Technology, Chapter 14: Project Management and Engineering Management, Chapter 15: Architectural Design and Its Theory, Chapter 16: Urban Planning and Design, Chapter 17: Landscape Planning and Design, Chapter 18: Architectural Environment, Eco-Building and Green Building, Chapter 19: Building Energy Saving Technology, Chapter 20: Construction Materials Research, Chapter 21: Materials Science, Chapter 22: Data and Signal Processing, Chapter 23: Environmental Engineering and Wastewater Treatment, Chapter 24: Engineering Education.

Description based on publisher supplied metadata and other sources.

Electronic reproduction. Ann Arbor, Michigan : ProQuest Ebook Central, 2018. Available via World Wide Web. Access may be limited to ProQuest Ebook Central affiliated libraries.