Intro -- Achievements in Engineering Sciences -- Preface, Committees and Sponsors -- Table of Contents -- Chapter 1: Advanced Materials Engineering and Processing Technologies -- An OLED Surface-Plasmon-Polariton Mode Energy Extraction Method Using a Dielectric Extraction Layer -- Effect of Post Curing, Fibre Content and Resin-Hardener Mixing Ratio on the Properties of Kenaf-Aramid Hybrid Composites -- Environmental Friendly Sulphoaluminate Cement Based Rapid Hardening and Repair Materials -- Membrane Processing of Refined Palm Oil Wastewater Using TiO2 Entrapped Nanoporous PVDF Membrane -- Discharge Criterion along the Surface of Solid Dielectric in SF6 under High Pressure -- The Photodegradation Performance of Phosphotungstic Acid/CdS Composite Materials to Organic Dyes -- Rigidity Analysis of Kenaf Thermoplastic Composites Using Halpin-Tsai Equation -- Preparation and Characteristics of Electrospun Silver-Containing PHBV Ultrafine Fiber -- Pore Size Control of Ordered Mesoporous Carbons and Adsorption Performance of Dye Molecules -- Investigating the Effects of Blending Ratio and Injection Parameters on the Tensile Properties of Glass Fiber-Filled Nylon 66 Composite Gear -- Polycrystalline Silicon Wafer Surface Color Defect Inspection Based on Machine Vision -- Investigation into the Differences Thermal Properties of SLS Polymer Powder Materials Using Differential Scanning Calorimetry (DSC) -- Preparation of High Solid Content Polyurethane Emulsion with Sulfonate Hydrophilic Chain-Extending Agents -- Asbestos and Alternative Materials -- Relationship between Foamability and Nanoparticle Concentration of Carbon Dioxide (CO2) Foam for Enhanced Oil Recovery (EOR) -- Preparation of Hydroxyapatite Composite Coatings with Interlayer of TiO2 and its Corrosion Behaviors.

Encapsulation of Multi-Enzymes on Waste Clay Material: Preparation, Characterization and Application for Tapioca Starch Hydrolysis -- The Optimum Number of Trays and Solvent Circulation Rate in Removing Acid Gases in Absorption Unit -- Effect of Leaching Treatment on Mechanical Properties of Natural Rubber Latex (NRL) Products Filled Modified Kaolin -- Optimization of Drying and Extraction Process of Pereskia bleo Leaves in Determining Antioxidant Properties Utilizing Pareto ANOVA -- Performance Evaluation of Agarwood Distillation Waste as Retarder for High Strength Oilwell Cement -- Filled-NR Conductive Thin Film: A Simple Route of Graphene Dispersion in Natural Rubber Latex -- A Study on Effect of PFA on Stabilized Material Using Direct Shear Test -- Enhanced Thermal Conductivity of Nanofluid by Synergistic Effect of Multi-Walled Carbon Nanotubes and Fe2O3 Nanoparticles -- NIR and Upconversion Luminescence Properties of Nd3+ Doped in Gd2O3-CaO-SiO2-B2O3 Glass System -- To Produce Electromagnetic Shielding Material from Lignin of Black Liquor -- Investigation into the Differences Chemical Properties of Laser Sintering Polymer Powders Using Fourier Transform Infrared Spectroscopy -- Chiral Structure in a Hard/Soft/Hard Layered Magnet -- Effect of Aging Treatment on Structural and Mechanical Properties of CuCrZr/AlN Nanocomposites -- Numerical Analysis on High Speed Liquid-Solid Impact of 17-4PH Material -- Gas Phase Synthesis of Vanadium Oxide Nanoparticle Films with Temperature Controlled Surface Plasmon Resonance Properties -- Biodiesel Preparation with Solid Base Catalyst under Ultrasonic Assistant -- Study on Microphase Separation of Waterborne Polyurethane by the Infrared Spectroscopy Peak Fitting -- Electro-Reduction of Ilmenite to FexTi Alloys in Molten CaCl2 -- Review of Copper Atmospheric Corrosion in H2S.

Optical Properties of Two Malposed Silver Triangular Nanocylinder Arrays -- Study on the Optimal Proportion and Properties of Stabilized Soil Using Beach Clay -- Yields Performance of Automotive Paint Sludge via Microwave Assisted Pyrolysis -- Optical Characteristics of Chemically Prepared ZnO Nanostructures on Silica Modified Polyaniline Nanocomposites -- Morphological and Optical Characteristics of Zinc Sulfide on Silica-Modified Polyaniline Grown on Glass and Platinum-Coated Substrates -- The Use of Response Surface Methodology (RSM) in Experimental Design of Membrane Treatment in Treating PW from Oil and Gas Field -- Magnetic Attenuation in Superconducting Cylinders by Beer-Lambert Modified Model -- Transient AC Electro-Osmotic Flow of Generalized Maxwell Fluids through Microchannels -- Tribological Properties for Cast Iron CrMo at High Temperature -- Effect of Fly Ash Content on Mechanical Properties of Cement-Fly Ash Stabilized Crushed Stones -- Poplar Wood Veneer Stain Retardant Study the Integration Process -- The Effects of Cu Content on Microstructure and Mechanical Properties of Thixoformed A319 Aluminium Alloys -- Under-Deposit Corrosion Rate Evaluation in Cooling Water System by Weight Loss, Profilometric and Electrical Resistance Methods -- Effects of Curing Systems on the Strength and Microstructure of Reactive Powder Concrete with Iron Tailing Sands -- Thermal Treatment Effect on Catalytic Activity of Au/TiO2 for CO Oxidation -- Thermodynamic Solidification Path Assessment and Microstructural Comparison of Deep Eutectic Au-Cu-Si System -- Photovoltaic Performance Improvement of Dye-Sensitized Solar Cells (DSSCs) Based on Y-Doped TiO2Thin Films -- Effect of Al Addition in Cast Nickel Base Superalloy, GTD-111 on Microstructures and Oxidation Behaviors at 900°C and 1000°C.

Effect of Al and Ti Additions in Cast Nickel Base Alloy, Grade Hastelloy X by Arc Melting Process on Microstructures and Oxidation Behavior at 900°C and 1000°C -- A Study of Gold Recovery from E-Waste by Bioleaching Using Chromobacterium violaceum -- Surface Modifications of Mg Alloys Based on Micro-Arc Oxidation Methods from Manufacturing Perspectives -- Effects of Laser Cladding of Silicon Carbides Particles and Iron Based Powder -- Investigation of the Thermal Properties of Different Grades Polyamide 12 (PA12) in Improving Laser Sintering Process (SLS) -- Numerical Analysis for Process Parameter Effect in Electromagnetic Impact Welding of Aluminum Alloy Sheet -- Synthesis of Single-Crystalline Gold Nanosheet Having Multilayer Structure under the Polymeric Bulk Condition -- Design, Manufacturing and Welding of Aluminum Alloy UHV Chambers for Taiwan Photon Source -- Effect of Cold Rolling Process on the Microstructure and Corrosion Behaviors of 316L Stainless Steel in Simulated Body Fluids -- Steam Methane Reforming of Natural Gas with Substantial Carbon Dioxide Contents - Process Optimization for Gas-to-Liquid Applications -- Preparation of Gold Nanocrystals Having Various Morphologies under Polymeric Bulk Phase -- Optimization Sol Gel Process Parameter of CaCu3Mn4O12 -- The Technological Conception of Quality Assurance in the Surface Treatment of Aluminum and Copper Alloys -- Study the Effect of Vegetable-Based Lubricant on Surface Roughness during Milling Operation by Using Response Surface Methodology -- Production of Self-Healing PI Polymeric Films with Encapsulated TMPTA in PU Microparticles -- Low Temperature Annealing Effect on Electrical Properties of Multicrystalline Silicon Wafers for Photovoltaic Application -- Controlling the Growth of ZnO-SiO2 Nanostructures Using Pt-Coated Si Substrate.

Growth of Zinc Oxide Nanostructures on Electrochemically-Etched p-Type Silicon(100) Substrate by Chemical Bath Deposition Method -- The Analysis of Influence on the Edge Drop of Tandem Cold Rolling Mill -- Chapter 2: General Mechanical Engineering and Applied Mechanics -- A Modified EEMD Decomposition for the Detection of Rolling Bearing Faults -- Research on Stochastic Resonance Method Based on Bee Colony Algorithm and its Application to Bearing Fault Diagnosis -- Effects of Temperature and Volume Agglomerate Fraction on Mechanical Response of PEMFC Electrodes -- Structural Optimization of the Telescopic Boom of a Certain Type of Truck-Mounted Crane -- A New Plasmonic Filter through Double Metal Films Perforated with Rectangular Grooves and Circular Holes -- Metallic Ellipsoidal Array - Film for Enhancing Transmission via Plasmonic Coupling -- The Design of a Cylindrical Cam Structure whose Profile could be Reconstructed -- Strain Measurement in the Steel Shell Surface Impacted by a Falling Ball -- Analysis and Calculation of Spud Clamshell Dredger's Heeling -- Dynamical Penetration Simulation of Solid Target under Shaped Charge Liner -- The Study Wear Resistance of the Modified Surface of the Cutting Tool -- Mechanical Effects and Existing Problems Analysis of Anchor Frame Combination Supporting Structure -- The Inversion of Formation Parameters after Volume Fracturing -- Multi-Pulse Chaotic Dynamics of a Composite Laminated Plate with Strong Coupling -- Metallurgical Defect and Hydrogen Embrittlement Failure of a Gear -- The Optimized Design of Tower Crane Hoisting System Based on the Improved Particle Swarm Optimization Algorithm -- Finite Element Analysis of the Influence of Balance Mode on Rolling Mill Universal Spindle Strength -- The Research on Analysis and Test Technology of Automobile Gearbox Assembly Process.

Simulation Analysis and Experimental Research on Direct-Drive Wave Turbine.

Collection of selected, peer reviewed papers from the 2014 3rd International Conference on Manufacturing Engineering and Process (ICMEP 2013), April 10-11, 2014, Seoul, Korea. The 378 papers are grouped as follows: Chapter 1: Advanced Materials Engineering and Processing Technologies, Chapter 2: General Mechanical Engineering and Applied Mechanics, Chapter 3: Applied Thermodynamics, Heat Transfer, Energy Conversion, Chapter 4: Instrumentation, Measurement Technologies, Analysis and Methodology, Chapter 5: Electronics and Integrated Circuits, Embedded Technology and Applications, Chapter 6: Electrical Engineering and Electric Machines, Chapter 7: Power System and Energy Engineering, Its Applications, Chapter 8: Mechatronics and Robotics, Chapter 9: Control and Automation of Manufacturing, Chapter 10: Signal and Image Processing, Data Mining and Computational Mathematics, Chapter 11: Communication, Networks and Information Technologies, Chapter 12: New Technologies, Methods and Technique in Civil Engineering, Chapter 13: Traffic and Transportation, Chapter 14: Oil and Gas Engineering, Chapter 15: Product Design and Industrial Engineering.

Description based on publisher supplied metadata and other sources.

Electronic reproduction. Ann Arbor, Michigan : ProQuest Ebook Central, 2018. Available via World Wide Web. Access may be limited to ProQuest Ebook Central affiliated libraries.